The pillars are made of 7076 T6 aircraft grade aluminum for each individual rifle.  The stock is inletted so that action/barrel assembly is only in contact with the pillars & the back side of the  recoil lug.  The pillars and the back side of the recoil lug are bedded in Pro Bed 2000.  The barrel is free floated.

$200.00   

Recommended for long range, varmint or competition rifles.  This bedding process requires extensive inletting and machine time, but offers the highest rigidity, and receiver/barrel assembly resonance of any bedding offered.  The block is a 2 piece design - 4" long, and  the base attaches to the stock using 8 each helicoiled (into the stock) socket head grade 8 bolts making it removable.  A hole is bored into the block the exact diameter of the barrel shank, and the top saddle of the block is attached to the base by 8 each socket head bolts.  The remainder of the barrel, and the receiver assembly are free floated.  This method eliminates receiver flex.

This block has a black anodized finish, and is designed to fit the McMillan Fiberglass Stocks, Inc. A-5 Tactical Sniper stock with a barrel shank diameter of 1.25".

This block is mounted in a McMillan Fiberglass Stocks, Inc.,  Bill Shehane designed, bench rest stock.  This block will accept a 1.45" barrel shank.

$500.00+

Entire barrel is epoxy bedded into the stock.  The receiver/trigger/bottom metal assembly is free floated.  This is bedding method is permanent.  This method allows us to install a heavy weight barrel without the resultant receiver flex.

This hardware allows adjustment in all 4 directions, up & down, and left & right.  Soft top style add $65.00

Made by Speedlock.  Fully adjustable for length of pull, drop at heel, height at comb, and angle of the stock.

Install 1 each Edwards Recoil Reducer in solid stock.  Includes the recoil reducer.

Installation - does not include pad

Shorten length of pull and reinstall recoil pad

Prepare stock for action/barrel assembly installation